flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Utah adopts 2018 International Energy Conservation Code

Codes and Standards

Utah adopts 2018 International Energy Conservation Code

Provisions include increased building envelope performance and reduced air infiltration.


By Peter Fabris, Contributing Editor | October 15, 2019

Courtesy Pixabay

Utah became the latest state to update its commercial building energy efficiency code from the 2015 International Energy Conservation Code (IECC) to the 2018 IECC in July.

The new code permits the use of the ASHRAE/IES 90.1-2016 standard, giving building owners and design teams an alternative compliance path. Any plans submitted for permitting on or after July 1 are required to follow 2018 IECC new energy code requirements.

The new code provides for improved building envelope performance and reduced air infiltration. Another change is a requirement for occupancy sensor controls for lighting shut off within open plan offices.

The occupancy sensor control shut off time delay was reduced to 20 minutes from 30 minutes. Open plan offices must limit the size of the occupancy sensor-controlled area to separate 600 square-foot zones. When occupancy is not detected in these zones, general lighting must automatically shut off or be reduced by at least 80%.

Related Stories

| Oct 20, 2011

Process leads to new design values for southern pine and other visually graded dimension lumber

A summary of the process used to develop new design values will clarify many of the questions received by the SFPA.

| Oct 19, 2011

Another drop for Architecture Billings Index

Positive conditions seen last month were more of an aberration.

| Oct 18, 2011

Dow Building Solutions invests in two research facilities to deliver data to building and construction industry

  State-of-the-art monitoring system allows researchers to collect, analyze and process the performance of wall systems.

| Oct 14, 2011

ACI partners with CRSI to launch new adhesive anchor certification program

Adhesive anchor installer certification required in new ACI 318-11.

| Oct 13, 2011

New Building Materials Label Focuses On Sustainability

Architectural products company Construction Specialities and design firm Perkins + Will have created a label for building materials to shed light on product content.

| Oct 13, 2011

New Law: California Building Standards Commission Must Include Green Expert

A new California law, AB 930, requires that one member of the California Building Standards Commission be “experienced and knowledgeable in sustainable building, design, construction, and operation.”

| Oct 13, 2011

AGC Urges Repeal of 3% Withholding On Government Contracts

The U.S. House of Representatives is planning a vote in October on a bill to repeal the 3% withholding requirement on all federal and state contracts for goods and services.

| Oct 13, 2011

House Bill Would Block New OSHA Regulations

Proposed riders in a U.S. House of Representatives spending bill would block the Occupational Safety and Health Administration (OSHA) from issuing controversial workplace safety and health regulations.

| Oct 11, 2011

AIA introduces five new documents for use on sustainable projects

These new documents will be available in the first quarter of 2012 as part of the new AIA Contract Documents service and AIA Documents on Demand.

| Oct 7, 2011

GREENBUILD 2011: UL Environment releases industry-wide sustainability requirements for doors

  ASSA ABLOY Trio-E door is the first to be certified to these sustainability requirements.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021