Public restrooms are at the top of the list of places where you would like to spend as little time as possible while touching as few things as possible. New technology from Bradley Corp. is doing all it can to improve the public restroom experience.
Verge with WashBar technology provides touchless clean, rinse, and dry functionaility in a single lavatory unit. The WashBar is made up of a piece of chrome-plated stainless steel with LED lighting and easy-to-identify icons on top of the bar that guide users through the clean/rinse/dry process.
The WashBar forgoes the usual reusable soap tank and instead uses a single-use one-gallon soap container to reduce germ contamination. When the container is empty, it is simply replaced with a full one.
The integrated dryer has been designed to work in tandem with the bowl to eliminate water spray onto the floor or the user. Owners can adjust the air speed of the dryer in instances where a quieter experience is desired or necessary.
Water is dispensed at 0.5 gpm. An ultra-low-flow option (0.35 gpm) is available, as are one-, two-, and three-basin systems. The units are made with Bradley’s Evero quartz material,
a resilient natural composite.
Courtesy of Bradley Corp.
Related Stories
| Nov 8, 2011
Transforming a landmark coastal resort
Originally built in 1973, the building had received several alterations over the years but the progressive deterioration caused by the harsh salt water environment had never been addressed.
| Nov 8, 2011
WEB EXCLUSIVE: Moisture-related failures in agglomerated floor tiles
Agglomerated tiles offer an appealing appearance similar to natural stone at a lower cost. To achieve successful installations, manufacturers should provide design data for moisture-related dimensional changes, specifiers should require in-situ moisture testing similar to those used for other flooring materials, and the industry should develop standards for fabrication and installation of agglomerated tiles.
| Nov 8, 2011
$11 million business incubator Florida Innovation Hub at the University of Florida completed by Charles Perry Partners, Inc.
The facility houses the UF Office of Technology Licensing, UF Tech Connect, other entities, and more than 30 startup technology tenants.
| Nov 4, 2011
Mortenson Construction builds its fifth wind facility In Illinois
Shady Oaks Wind Farm is under construction near Compton, Ill.
| Nov 1, 2011
Holcim awards winners for North America announced
A socio-architectural project to create regional food-gathering nodes and a logistics network in Canada's high arctic territory won the top prize for North America of $100,000.
| Oct 26, 2011
Metl-Span selected for re-roof project
School remained in session during the renovation and it was important to minimize the disruption as much as possible.
| Oct 26, 2011
Shawmut Design and Construction awarded Tag Heuer build in Aventura, Fla.
New store features 1,200 sf fit out at Aventura Mall.
| Oct 25, 2011
Universal teams up with Earthbound Corp. to provide streamlined commercial framing solutions
The primary market for the Intact Structural Frame is light commercial buildings that are typically designed with concrete masonry walls, steel joists and steel decks.
| Oct 25, 2011
Commitment to green building practices pays off
The study, conducted by the Pacific Northwest National Laboratory, built on a good indication of the potential for increased productivity and performance pilot research completed two years ago, with similarly impressive results.
| Oct 25, 2011
DOE issues report on financing solar photovoltaic systems for K-12 schools
The report examines the two primary types of ownership models used to obtain solar installations. This analysis can help school administrators across the country select the best option for deploying solar technologies in their school districts.
