Each year, new products come on the market that solve developmental pain-points. Here are six innovative products for various multifamily developments, including a condominium-wide smart electrical system, heavy-duty aluminum doors, and prefabricated panels.
1. Solarban R100 (Architectural glass that counters the strong Texas sun)
Austin's new 34-story 70 Rainey houses 164 condos featuring floor-to-ceiling Solarban R100 glass from Vitro Architectural Glass. "Glazing selection on tall buildings is one of the most complicated design decisions we face today to navigate energy codes, aesthetics, and environmental performance," said Joshua Coleman, AIA, LEED AP, Principal/Design at Page architecture firm. "Solarban R100 glass provides one of the best solar heat gain coefficients on the market without being overly reflective, too dark, or tinted." Win-Con was the glazier.
2. Leviton Decora smart devices (Smart electrical systems for luxury residences in upstate N.Y.)
Bonacio Construction (GC) and Prediletto Electric (electrical contractor) specified Leviton Smart Circuit Breakers and Leviton USB Type A/Type-C In-Wall Outlet Charger with 15A Tamper-Resistant Outlet for The Moderne Condominiums, Sarasota Springs, N.Y. Leviton Decora Smart Dimmers were installed in the living rooms, kitchens, and dining rooms of the two- and three-bedroom condos and in the penthouse units.
3. Omega-Lite ACM panels (Philadelphia apartment building clad in ACM panels)
For the exterior of SOLO on Chestnut, a seven-story, 250,000-sf complex of 280 luxury apartments near the University of Pennsylvania and Drexel University, JKRP Architects (designer) and The HOW Group (GC) specified 14,600 sf of Charcoal Grey Omega-Lite ACM panels. Makosh Services used Laminators' Clip & Caulk installation system.
4. Aluminum Swing Terrace Door (Aluminum door for high-rise, high-wind applications)
Crystal Window & Door Systems' Series 1450/1460 Aluminum Swing Terrace Door has been structurally and thermally enhanced and offers a new hydraulic closer, glazing, and a laboratory water-tested ADA low-sill option. The Series 1450/1460 Terrace Door is constructed with heavy-duty 0.093-inch wall thickness extrusion and a redesigned strong multi-chamber 3.25-inch jamb frame, for use in high-rise and wind-prone installations.
A powerful adjustable hydraulic closer from leading German hardware manufacturer G-U (Gretsch-Unitas) features a concealed mounting plate and slide arm assembly designed for outswing door operation, which allows effortless operation of the door while maintaining the door’s sleek look on the interior. The aluminum frame of Crystal’s Series 1450/1460 Aluminum Swing Terrace Door is finished in durable environmentally sustainable powder coat paint, to either AAMA 2604 or 2605 performance standards.
5. Centerline Prefab uses Sto prefab panels to save time on WMU student housing complex
Centerline Prefab set 48-foot StoPanel Metal ci panels on the upper four floors and Sto Backup panels for the six-story Arcadia Flats residential housing at Western Michigan University, in Kalamazoo. The 206 wall panels were prefabricated off site and installed on site in 37 minutes per panel. Stantec Architecture (architect) and Triangle Associates (GC) were on the project team.
6. Atlas ACFoam (Roofing system that prevents ice jams in Colorado project)
Jeff Johnston, president of The Roofing Company, Granby, Colo., installed more than 210 squares of Atlas ACFoam and ACFoam CrossVent from Atlas Roofing Corp. on the roof of the nine residences and six penthouses ($7.4 million to $9.6 million) at the Vail Mountain View Condos, in Vail Village. The roofing system provided a fully continuous insulation solution with an R-value of 20.
Related Stories
| Aug 11, 2010
ASHRAE Receives NIST Grant to Study IAQ in Retail Stores
The American Society of Heating Refrigeration and Air-conditioning Engineers (ASHRAE) has been awarded $1.5 million dollars in grant money from the National Institute of Standards and Technology (NIST) to conduct a three-year research project on ventilation and indoor air quality in retail stores.
| Aug 11, 2010
Georgia Tech requires LEED Gold for all new buildings and renovations
The Georgia Institute of Technology in Atlanta is currently updating its facilities design standards to meet LEED (Leadership in Energy and Environmental Design) Gold as set by the U.S. Green Building Council. Energy Ace, Inc., an Atlanta-based sustainability consulting firm is assisting Georgia Tech in preparing the Standards upgrade.
| Aug 11, 2010
UC Merced researchers receive $568,000 grant to develop solar sensing, tracking system
Alberto Cerpa, an engineering professor at the University of California Merced, has received a $568,202 grant from the National Science Foundation to develop a system that will measure and track the amount of sunlight that reaches ground level where photovoltaic panels and solar concentrators used in solar energy systems collect light and heat to turn into electricity.
| Aug 11, 2010
Mark McCracken named chair-elect of USGBC Board of Directors
Mark MacCracken, CEO of CALMAC, Inc., a producer of cold storage energy solutions, has been selected as Chair-elect of the U.S. Green Building Council (USGBC) Board of Directors for the 2010 calendar year. The USGBC Board of Directors is responsible for articulating and upholding the vision, values and mission of USGBC. In 2009, MacCracken was elected to serve a second 3-year term as Director in the Energy Services Seat.
| Aug 11, 2010
Only four out of 337 cities added construction jobs in 2009
Construction employment grew in only four out of 337 metropolitan areas in 2009 as spending on construction projects dropped by $100 billion in December to a six-year low of $903 billion, according to a new analysis by the Associated General Contractors of America of federal figures released recently.
| Aug 11, 2010
Zero Energy Buildings + Homes' Call for Editorial Contributions & Contributors
BD+C will publish its 8th Annual White Paper on Green Buildings, "Zero Energy Buildings + Homes," in November-and you can contribute to it. We're looking for highly qualified experts (or teams of experts) to write individual chapters (about 2,000-3,000 words). We've started the outline here, but we'd like your suggestions about additional chapters. What did we miss? Help us shape this important report.
| Aug 11, 2010
Blue ribbon panel unveils recommendations for NYC's green building codes
In response to City's request, the task force unveils more than 100 recommendations for greening NYC buildings, in most sophisticated analysis ever conducted by a municipality
| Aug 11, 2010
ULI: 'Old Normal' will not be a part of the housing recovery
As the U.S. economy recovers, emerging trends in demographics and consumer behavior will become major drivers of new housing opportunities, resulting in a residential market vastly different from the one that existed prior to the recession, according to Housing in America: The Next Decade, a new research paper authored by John K. McIlwain, senior resident fellow, Urban Land Institute/J. Ronald Terwilliger Chair for Housing.
| Aug 11, 2010
Billings increase less than a point in December, still in negative territory
The American Institute of Architects reported the December Architecture Billings Index rating was 43.4, up slightly from 42.8 in November. The score indicates a continued decline in demand for design services (any score above 50 indicates an increase in billings). AIA Chief Economist Kermit Baker said the inability to get financing is still the main roadblock to recovery.
| Aug 11, 2010
FMI: 2009 was the bottom for residential, non-residential construction still in freefall
While 2009 was likely the bottom in terms of percentage decline, 2010 will be the bottom in terms of dollar volume for non-residential construction, according to market analysts at consulting firm FMI. Residential construction is expected to begin recovering in 2010. The economy may show some signs of improving, but it is just the beginning of the downfall for nonresidential construction.
