The American Architectural Manufacturers Association (AAMA) released a new document laying out comparisons among three different rating systems for condensation on interior surfaces of fenestration products.
The formation of condensation on these surfaces in winter months is problematic in almost all modern buildings. This document addresses some of the common causes and the technical issues related to condensation. It also offers a comparison of the tools available for rating fenestration systems for condensation resistance.
“This new AAMA document was developed to provide a single reference source on the three common condensation rating systems for the U.S. and Canada,” says Doug Holmberg (Apogee Enterprises), co-chair of the Condensation Ratings Comparison Task Group. “It also provides information on how each rating is calculated for comparing the condensation resistance of products and the differences in the rating systems.”
Steve Strawn (JELD-WEN), co-chair of the Condensation Ratings Comparison Task Group, adds that window condensation ratings can be difficult to understand, and that the question has been further complicated by the use of different methods to rate condensation resistance.
Related Stories
| Mar 23, 2013
Fire resistive curtain wall helps mixed-use residential building meet property line requirements
The majority of fire rated glazing applications occur inside the building in order to allow occupants to exit the building safely or provide an area of refuge during a fire. But what happens when the threat of fire comes from the outside? This was the case for The Kensington, a mixed-use residential building in Boston.
| Mar 20, 2013
Folding glass walls revitalize student center
Single-glazed storefronts in the student center at California’s West Valley College were replaced with aluminum-framed, thermally broken windows from NanaWall in a bronze finish that emulates the look of the original building.
| Mar 14, 2013
PPG appoints Bryan Iams vice president, corporate communications and marketing
PPG Industries announced that Bryan Iams has been named vice president, corporate communications and marketing, effective Oct. 1. Iams will report to J. Rich Alexander, executive vice president.
| Mar 6, 2013
Safti First's two-hour fire rated GPX Framing achieves Level 8 Ballistic Rating
Safti First announced that in addition to meeting ASTM E-119/NFPA 251/UL263 with hose stream for up to 2 hours, the SAFTIfire GPX Framing now has a Level 8 Ballistic Rating per UL 752 Standard for Bullet Resistant Materials.
| Feb 14, 2013
Guardian DiamondGuard installed in the Empire State Building
Guardian Industries DiamondGuard glass was recently installed on the 102nd story of the Empire State Building in New York City as part of an extensive renovation to update this venerable landmark.
| Feb 8, 2013
5 factors to consider when designing a shade system
Designing a shade system is more complex than picking out basic white venetian blinds. Here are five elements to consider when designing an interior shade system.
| Feb 8, 2013
WDMA releases national policy agenda for windows, doors, skylights
Document urges a regulatory stance that will support manufacturing, including favorable building codes and tax policy.
| Jan 31, 2013
LaCantina Doors receives Houzz’s 2013 'Best of Remodeling' Customer Satisfaction Award
LaCantina Doors has been awarded "Best Of Houzz" 2013 by Houzz, the leading online platform for residential remodeling and design. The innovative folding company was chosen by the more than 11 million monthly users that comprise the Houzz community.
| Oct 15, 2012
Silicones from Dow Corning solve high-altitude technical challenges at the world’s tallest tower
The spectacular Burj Khalifa skyscraper soars to 828m above ground level, holding the record for being the world’s tallest building and also for the highest installation of an aluminum and glass façade. To take on its numerous challenges and technical difficulties, it required proven silicone solutions and full support from Dow Corning.
| Jun 1, 2012
New BD+C University Course on Insulated Metal Panels available
By completing this course, you earn 1.0 HSW/SD AIA Learning Units.
