flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

ASCE updates standard for structures using tensile membrane

Codes and Standards

ASCE updates standard for structures using tensile membrane

The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.


By Peter Fabris, Contributing Editor | March 3, 2017

Photo courtesy of Azinsanaat Espadana, Wikimedia Commons

The American Society of Civil Engineers recently updated the standard for tensile membrane structures.

This new edition updates the previous Standard ASCE/SEI 55-10, and replaces Standard ASCE 17-96, Air-Supported Structures. Now, the guidelines for conventional tensile membrane structures and frame-covered membrane structures are combined in a single standard.

“A valuable reference for both engineers and practitioners, Tensile Membrane Structures will aid in the design or construction of a wide variety of tensioned fabric structures,” ASCE says. 

Related Stories

Codes and Standards | Feb 16, 2016

New York City implements new crane safety plan following deadly accident

The plan includes restrictions on crawler cranes during windy conditions.

Resiliency | Feb 16, 2016

Obama establishes federal earthquake risk management standard

The standard requires federal agencies to use earthquake-resistant design provisions in current building codes.

Codes and Standards | Feb 12, 2016

Huge fraud case involving alleged engineering impostors uncovered in California

Hundreds of buildings may have to be demolished.  

Codes and Standards | Feb 11, 2016

New York governor makes emergency design-build authorization

The declaration was issued in response to Winter Storm Jonas which dumped over 18 inches of snow in parts of the state.

Green | Jan 29, 2016

USGBC names top 10 states for LEED green building

Illinois leads the list for the third straight year.

Codes and Standards | Jan 25, 2016

Dept. of Energy releases decision guides for plug and process loads

Plug and process loads consume about 30% of the primary energy in U.S. commercial buildings today.

Codes and Standards | Jan 22, 2016

ConsensusDocs releases new multi-party IPD agreement and joining agreement

The documents serve as a comprehensive revision of previous IPD agreement

Codes and Standards | Jan 22, 2016

State Savings Calculator analyzes savings associated with energy codes

The calculator breaks down the cost-effectiveness of energy codes on a state-by-state basis.

Codes and Standards | Jan 22, 2016

Metal Roofing Seaming Guide published by Metal Construction Association

The free document is specifically tailored for metal roof installation.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021