flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

ASCE updates standard for structures using tensile membrane

Codes and Standards

ASCE updates standard for structures using tensile membrane

The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.


By Peter Fabris, Contributing Editor | March 3, 2017

Photo courtesy of Azinsanaat Espadana, Wikimedia Commons

The American Society of Civil Engineers recently updated the standard for tensile membrane structures.

This new edition updates the previous Standard ASCE/SEI 55-10, and replaces Standard ASCE 17-96, Air-Supported Structures. Now, the guidelines for conventional tensile membrane structures and frame-covered membrane structures are combined in a single standard.

“A valuable reference for both engineers and practitioners, Tensile Membrane Structures will aid in the design or construction of a wide variety of tensioned fabric structures,” ASCE says. 

Related Stories

Codes and Standards | Jul 31, 2015

AIA, International Code Council reach collaborative agreement on building codes

The deal covers a wide range of initiatives, including code development, compliance, and sustainability.

Codes and Standards | Jul 31, 2015

2015 gypsum fire resistance design manual released

The 2015 edition contains nearly 100 new systems that supplement existing assemblies for walls and partitions, floor-ceiling systems, area separation walls, and many others.

Codes and Standards | Jul 27, 2015

New York City changing zoning rules to reduce shadows cast by high rises

For decades, the New York City’s zoning rules have made it hard to construct high-rise buildings that seem airy and minimize the shadows they cast. The city planning department is now working to change that.

Codes and Standards | Jul 27, 2015

ICC, ASHRAE outline roles to consolidate IgCC and 189.1

"IgCC Powered by 189.1” will provide the design and construction industry with “the single, most-effective way to deliver sustainable, resilient, high-performance buildings," according to the trade groups behind the agreement.

Codes and Standards | Jul 27, 2015

Tennessee county considers local worker requirement on construction projects

A proposed amendment to the charter governing Nashville and Davidson County would mandate that 40% of work hours on city- or county-funded construction jobs costing at least $100,000 be completed by residents.

Codes and Standards | Jul 27, 2015

New guide for installation of mineral fiber pipe insulation on chilled water systems

Developed for professional insulation contractors, the 36-page guide recommends methods for insulating chilled water piping systems using a vapor-sealed mineral fiber pipe insulation. 

Green | Jul 23, 2015

NASA: U.S. headed for worst droughts in a millennium

Data from NASA shows carbon emissions could be the driving force behind devastating water shortages and record droughts in the western U.S.

Multifamily Housing | Jul 16, 2015

Minneapolis relaxes parking requirements on new multifamily buildings

The city cut the number of spots required for large developments by half. It also will accept plans with no parking spaces in certain cases.

Codes and Standards | Jul 16, 2015

Berkeley, Calif., adopts balcony inspection program following deadly collapse

Apartment building balconies will be subject to inspections every three years under new regulations adopted following a deadly collapse.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021