flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Creating communities from defunct malls

Retail Centers

Creating communities from defunct malls


By Steve Kearney | Stantec | June 21, 2017

“Stores are closing at an epic pace. In fact, the retail industry could suffer far more store closures this year than ever.” — CNN, 4/24/17

It’s no secret that suburban retailing is in crisis. At the current pace, more stores will close in 2017than at the height of the Great Recession. As store vacancies—and lost tax revenues for local communities—mount, so do disinvestment, blight, and crime. Nowhere is this more visible than in the hundreds of struggling malls across the US.

Everyone blames online retailing for these problems, but in fact those purchases accounted for only about 8 percent of all U.S. retail sales in the fourth quarter of 2016. A more likely culprit: overbuilding. The US averages 7.3- square feet of retail per capita, compared to 1.7 square feet in Japan and 1.3 square feet in the UK. Online does pose a real threat (one analyst says that “50 percent of all retail not tied to bars and restaurants will go online by 2030”), but we already have more big boxes than we know what to do with.

Many of the areas around faltering malls face another serious threat: an oversupply of single-family housing and a dearth of high-quality, multi-family rentals. Millennials and empty nesters alike are choosing more urban, walkable environments. You may have read about this happening in cities, but it’s happening in suburban settings, too. These folks don’t want a house, and they want fewer cars, in part because the cost of car ownership has reached $8,700 annually. Times are changing … quickly.

For the suburbs of the 1960s and ’70s, typically built on previously undeveloped farmland, malls served as town centers and community gathering places. But as decades passed, piecemeal development turned the areas around them into traffic-choked seas of parking lots and drive-in businesses with no center.

A growing number of US communities have begun actively thinking about how to reinvent these locations as distinct, authentic districts. Yes, the automobile—and the all-consuming parking spaces that go with them—will remain (for now) but dramatic transformation is still possible. We’ve had the good fortune recently to work with two municipalities that have taken the lead in shaping their futures by rethinking the traditional mall.

 

Planning from the outside in

Ohio’s Miami Township, south of Dayton, faces a unique challenge. While the area suffers from the issues touched on above—store closings, aging buildings, auto-dependent development, and a lack of connections among adjacent land uses—the mall itself is a regional destination that remains relatively healthy. The focus of the plan quickly became one of creating a district around the mall that would improve the entire 2 square miles of the study area. 

 

Lyon's ridge shopping plaza

 

During the planning process, community members frequently said how much they enjoyed walking within the mall in fall and winter. The master plan creates a new Main Street along the eastern edge of the mall that crosses the current Sears site, which will shortly close. That will set up a direct intersection with the mall’s internal Main Street, creating a new focus for the area. 

 

Dayton mall main streets diagram

 

High-visibility signs of disinvestment made the entire district feel rundown and worn-out. In addition, the name “Dayton Mall Area” conveyed no sense of identity or location. Therefore, our plan for the area around the mall also included establishing it as a defined—and branded—district. The new name, “Miami Crossing,” gives a poorly defined area a clear identity; the marketing plan reinforces the new identify with signage, banners, and distinctive landscaping at key gateways.

 

Miami crossing banner on a light post

 

Planning from the inside out

The Route 419 Town Center Study in Roanoke, Virginia, had similar planning goals: conversion of auto-oriented strip development into a mixed-use, walkable town center. In this instance, however, the Tanglewood Mall has been unable to compete with a larger regional mall 20 minutes away. New owners bought the property just before the planning effort began, and they understood that the property couldn’t count on a future as a traditional, enclosed mall. They actively took part in the planning process and helped us develop a concept that deconstructed much of the mall interior while preserving anchor tenants. This may seem like a side story, but in most malls the anchor tenants control parking and view sheds, and they often have a say in which stores can (or cannot) locate in the mall. The mall owner frequently has only limited control in determining the property’s future.

All sides understood that entertainment- and experience-based retail (think sit-down restaurants with outdoor seating within an easy walk of local or boutique retailers) will define future success. That helped our team create a small-town center where the enclosed mall will give way to a wider mix of uses, including new housing, an inviting landscaped open space, and a network of new landscaped streets that invite walking and improve connectivity across the district. 

 

Rendering of outdoor shopping plaza with greenspace

 

What the future looks like

The upheaval in retail and shopping preferences presents many challenges, but it can also prod everyone to take a fresh look at traditional suburban development patterns. Miami Township and Roanoke County show that local leaders don’t have to wait for outside forces to reshape them; they can shape the future by pulling property owners, nearby residents, and other stakeholders together to chart a new course for the community.

More from Author

Stantec | Jul 18, 2024

Why decarbonizing hospitals smartly is better than electrification for healthcare design

Driven by new laws, regulations, tariffs, ESG goals, and thought leaders in the industry itself, healthcare institutions are embracing decarbonization to meet 2050 goals for emissions reductions.

Stantec | Jun 18, 2024

Could ‘smart’ building facades heat and cool buildings?

A promising research project looks at the possibilities for thermoelectric systems to thermally condition buildings, writes Mahsa Farid Mohajer, Sustainable Building Analyst with Stantec.

Stantec | Jun 8, 2024

8 ways to cool a factory

Whichever way you look at it—from a workplace wellness point of view or from a competing for talent angle—there are good reasons to explore options for climate control in the factory workplace.

Stantec | Apr 18, 2024

The next destination: Passive design airports

Today, we can design airports that are climate resilient, durable, long-lasting, and healthy for occupants—we can design airports using Passive House standards.

Stantec | Mar 18, 2024

A modular construction solution to the mental healthcare crisis

Maria Ionescu, Senior Medical Planner, Stantec, shares a tested solution for the overburdened emergency department: Modular hub-and-spoke design.

Stantec | Nov 20, 2023

8 strategies for multifamily passive house design projects

Stantec's Brett Lambert, Principal of Architecture and Passive House Certified Consultant, uses the Northland Newton Development project to guide designers with eight tips for designing multifamily passive house projects.

Stantec | Apr 10, 2023

Implementing human-centric design in operations and maintenance facilities

Stantec's Ryan Odell suggests using the human experience to advance OMSF design that puts a focus on wellness and efficiency.

Stantec | Jul 6, 2022

5 approaches to a net zero strategy that communities can start right now

Whether your community has started on a plan or is still considering net zero, now is the time for all of us to start seriously addressing climate change.

Stantec | Feb 14, 2022

5 steps to remake suburbs into green communities where people want to live, work, and play

Stantec's John Bachmann offers proven tactic for retrofitting communities for success in the post-COVID era.

Stantec | Feb 8, 2022

How gaming technology is changing the way we design for acoustics

Adding 3D sound from gaming engines to VR allows designers to represent accurate acoustic conditions to clients during design.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021