flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Celebrating brick in architecture

Celebrating brick in architecture

The Brick Industry Association’s 2012 Brick in Architecture Awards put the spotlight on new projects that make creative use of one of humankind’s oldest and most beloved building materials.


October 9, 2012
This article first appeared in the October 2012 issue of BD+C.

The Brick Industry Association’s 2012 Brick in Architecture Awards put the spotlight on new projects that make creative use of one of humankind’s oldest and most beloved building materials. On these pages are several of the “Best in Class Winners” from this year’s BIA competition.

Wylie Civic Complex

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The Wylie (Texas) Civic Complex weaves three public uses—city hall, recreation center, and public library—within a single tight design concept. The 137,000-sf complex, best in the municipal/government/civic category, attained LEED Silver certification. Architect: Holzman Moss Bottino Architecture, in association with Architexas. Mason contractor: DMG Masonry Ltd.

Bud Clark Commons

 

 

 

 

 

 

 

 

 

In the multifamily category, the award goes to Bud Clark Commons, which is described as a “centerpiece of the Portland’s plan to end homelessness.” The LEED Platinum apartment complex provides housing and comprehensive social services to the Oregon city’s homeless population. Architect: Holst Architecture. Mason contractor: J&S Masonry.

VIP Community Services, Men’s Residences

 

 

 

 

 

 

 

 

 

Honors in healthcare facilities go to the Men’s Residences facility in the East Tremont section of the Bronx, N.Y., a project of the Bronx-based nonprofit housing group VIP Community Services. This five-story, 30,000-sf facility provides housing, dining facilitiies, vocational training, and therapy for 80 men in addiction recovery. Architect/landscape architect: WASA/Studio A. Mason contractor: Procida Construction.

DuPage A.M.E. Chapel and Administrative Wing

 

 

 

 

 

 

 

 

 

The DuPage A.M.E. Chapel, the winner among houses of worship, provides a second chapel for this fast-growing congregation in Lisle, Ill., as well as a children’s church, classrooms, administrative offices, and a fellowship room. Architect: Harding Partners. Contractor: Moreton Construction. Mason contractor: J and E Duff.

Ogden International School of Chicago

 

 

 

 

 

 

 

 

 

 

 

Located on the site of an aging and overcrowded Chicago Public Schools building, the 110,000-sf K-8 school varies in design from the CPS prototype to reflect the uniqueness of Ogden’s international baccalaureate program. Architect: Nagle Hartray Architecture. Associate architect: Schroeder Murchie Niemiec Gazda-Auskalnis. Landscape architect: Terry Guen Design Associates. Contractor: Turner Construction Co. Mason contractor: Illinois Masonry Corp. +

Related Stories

Sustainability | Sep 18, 2024

3 living buildings made by a living practice

Prompting humans to reexamine our relationship to the environment, architecture creates the opportunity for us to physically experience ideas of beauty, performance, and structure through the distinct lens of place.

3D Printing | Sep 17, 2024

Alquist 3D and Walmart complete one of the nation’s largest free-standing, 3D-printed commercial structures

Walmart has completed one of the largest free-standing, 3D-printed commercial structures in the US. Alquist 3D printed the almost 8,000-sf, 20-foot-high addition to a Walmart store in Athens, Tenn. The expansion, which will be used for online pickup and delivery, is the first time Walmart has applied 3D printing technology at this scale. 

Retail Centers | Sep 17, 2024

Thinking outside the big box (store)

For over a decade now, the talk of the mall industry has been largely focused on what developers can do to fill the voids left by a steady number of big box store closures. But what do you do when big box tenants stay put?

Government Buildings | Sep 17, 2024

OSHA’s proposed heat standard published in Federal Register

The Occupational Safety and Health Administration (OSHA) has published a proposed standard addressing heat illness in outdoor and indoor settings in the Federal Register. The proposed rule would require employers to evaluate workplaces and implement controls to mitigate exposure to heat through engineering and administrative controls, training, effective communication, and other measures.

Codes and Standards | Sep 17, 2024

New California building code encourages, but does not mandate heat pumps

New California homes are more likely to have all-electric appliances starting in 2026 after the state’s energy regulators approved new state building standards. The new building code will encourage installation of heat pumps without actually banning gas heating. 

Mass Timber | Sep 17, 2024

Marina del Rey mixed-use development is L.A.’s largest mass timber project

An office-retail project in Marina del Rey is Los Angeles’ largest mass timber project to date. Encompassing about 3 acres, the 42XX campus consists of three low-rise buildings that seamlessly connect with exterior walkways and stairways. The development provides 151,000 sf of office space and 1,500 sf of retail space.

Education Facilities | Sep 16, 2024

Hot classrooms, playgrounds spur K-12 school districts to go beyond AC for cooling

With hotter weather occurring during the school year, school districts are turning to cooling strategies to complement air conditioning. Reflective playgrounds and roads, cool roofs and window films, shade structures and conversion of asphalt surfaces to a natural state are all being tried in various regions of the country. 

Office Buildings | Sep 16, 2024

Maximizing office square footage through ‘agile planning’

Lauren Elliott, RID, NCIDQ, Director of Interior Design, Design Collaborative, shares tips for a designing with a popular and flexible workspace model: Agile planning.

3D Printing | Sep 13, 2024

Swiss researchers develop robotic additive manufacturing method that uses earth-based materials—and not cement

Researchers at ETH Zurich, a university in Switzerland, have developed a new robotic additive manufacturing method to help make the construction industry more sustainable. Unlike concrete 3D printing, the process does not require cement.

Libraries | Sep 12, 2024

How space supports programming changes at university libraries

GBBN Associate Sarah Kusuma Rubritz, AIA, uses the University of Pittsburgh's Hillman Library to showcase how libraries are transforming to support students’ needs.

boombox1
boombox2
native1

More In Category


Urban Planning

Bridging the gap: How early architect involvement can revolutionize a city’s capital improvement plans

Capital Improvement Plans (CIPs) typically span three to five years and outline future city projects and their costs. While they set the stage, the design and construction of these projects often extend beyond the CIP window, leading to a disconnect between the initial budget and evolving project scope. This can result in financial shortfalls, forcing cities to cut back on critical project features.



Libraries

Reasons to reinvent the Midcentury academic library

DLR Group's Interior Design Leader Gretchen Holy, Assoc. IIDA, shares the idea that a designer's responsibility to embrace a library’s history, respect its past, and create an environment that will serve student populations for the next 100 years.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021