The construction workforce was smaller in every state and the District of Columbia in January 2010 than it was just 12 months earlier, according to a new analysis of federal data released today by the Associated General Contractors of America. The data indicated just how widespread the construction downturn is, association officials said, noting that 38 states and D.C. experienced a double digit percentage drop in construction employment.
"Construction employment is dropping everywhere and plummeting almost everywhere," said Ken Simonson, the association's chief economist. "Looking at this data, it is quite clear that the construction industry has yet to hit bottom."
Simonson noted that California lost more construction jobs, 128,700, while North Dakota lost the least jobs, 200, over the past twelve months. The five states with the largest percentage decline in employment were Nevada (29.9 percent); Arizona (26 percent); Colorado (22.2 percent); Idaho (21 percent); and Florida (20.4 percent). Meanwhile, North Dakota (1 percent); Nebraska (4.1 percent); Alaska (4.2 percent); South Dakota (5.9 percent); and Arkansas (6.2 percent) experienced the smallest decline in construction employment.
Even the monthly employment changes reflect the tough construction conditions, said Simonson, noting that 31 states lost construction jobs between December and January. He added that most of the states adding jobs for the month lost jobs in December, often more than they gained back in January. The economist said this suggested the monthly data was affected by unseasonable weather conditions that also are likely to affect February's state employment figures.
Association officials cited the new state employment data in urging the Senate to pass a ten month extension to the nation's surface transportation program and for the administration to accelerate stimulus-funded construction projects. "As privately-funded construction activity continues to decline, federal investments in infrastructure are often the difference between a job and unemployment for what's left of the industry."
View the state-by-state employment data.
Related Stories
Sustainability | Sep 18, 2024
3 living buildings made by a living practice
Prompting humans to reexamine our relationship to the environment, architecture creates the opportunity for us to physically experience ideas of beauty, performance, and structure through the distinct lens of place.
3D Printing | Sep 17, 2024
Alquist 3D and Walmart complete one of the nation’s largest free-standing, 3D-printed commercial structures
Walmart has completed one of the largest free-standing, 3D-printed commercial structures in the US. Alquist 3D printed the almost 8,000-sf, 20-foot-high addition to a Walmart store in Athens, Tenn. The expansion, which will be used for online pickup and delivery, is the first time Walmart has applied 3D printing technology at this scale.
Retail Centers | Sep 17, 2024
Thinking outside the big box (store)
For over a decade now, the talk of the mall industry has been largely focused on what developers can do to fill the voids left by a steady number of big box store closures. But what do you do when big box tenants stay put?
Government Buildings | Sep 17, 2024
OSHA’s proposed heat standard published in Federal Register
The Occupational Safety and Health Administration (OSHA) has published a proposed standard addressing heat illness in outdoor and indoor settings in the Federal Register. The proposed rule would require employers to evaluate workplaces and implement controls to mitigate exposure to heat through engineering and administrative controls, training, effective communication, and other measures.
Codes and Standards | Sep 17, 2024
New California building code encourages, but does not mandate heat pumps
New California homes are more likely to have all-electric appliances starting in 2026 after the state’s energy regulators approved new state building standards. The new building code will encourage installation of heat pumps without actually banning gas heating.
Mass Timber | Sep 17, 2024
Marina del Rey mixed-use development is L.A.’s largest mass timber project
An office-retail project in Marina del Rey is Los Angeles’ largest mass timber project to date. Encompassing about 3 acres, the 42XX campus consists of three low-rise buildings that seamlessly connect with exterior walkways and stairways. The development provides 151,000 sf of office space and 1,500 sf of retail space.
Education Facilities | Sep 16, 2024
Hot classrooms, playgrounds spur K-12 school districts to go beyond AC for cooling
With hotter weather occurring during the school year, school districts are turning to cooling strategies to complement air conditioning. Reflective playgrounds and roads, cool roofs and window films, shade structures and conversion of asphalt surfaces to a natural state are all being tried in various regions of the country.
Office Buildings | Sep 16, 2024
Maximizing office square footage through ‘agile planning’
Lauren Elliott, RID, NCIDQ, Director of Interior Design, Design Collaborative, shares tips for a designing with a popular and flexible workspace model: Agile planning.
3D Printing | Sep 13, 2024
Swiss researchers develop robotic additive manufacturing method that uses earth-based materials—and not cement
Researchers at ETH Zurich, a university in Switzerland, have developed a new robotic additive manufacturing method to help make the construction industry more sustainable. Unlike concrete 3D printing, the process does not require cement.
Libraries | Sep 12, 2024
How space supports programming changes at university libraries
GBBN Associate Sarah Kusuma Rubritz, AIA, uses the University of Pittsburgh's Hillman Library to showcase how libraries are transforming to support students’ needs.
