One of the architectural features that students love about the new 1,197-bed Quad on the University of Houston campus is visual connectivity. Nearly every common area is a showcase of light. By day, natural light floods interior spaces and connects students with one of five beautifully landscaped courtyards.
By night, students returning to their $124 million ‘home away from home’ behold study rooms and lounges alive with light, a visual connection with the vibrant social and scholastic world within. The Quad greeted its first students in late August under the University’s strict pandemic protocols.
“We try very hard not to have visually dead-end corridors where there’s no natural light,” explains Andy Albin, the project executive and a principal with EYP, the architect of The Quad. “It’s all about visual connections.” Achieving that requires a lot of glass.
“It’s a really important material to us,” says Albin. “Not just the amount of glass, but the quality of glass. We push for as much glass as we can. Classrooms. Hallways. Lounges. Study rooms.”
SuperClear 45-HS-LI in GPX Architectural Series Frames and GPX Builders Series Door (pictured above) uses low-iron glazing for superior optical clarity that even expensive, premium polished versions of ceramic cannot match.
Their design emphasis on transparency through glass has made the design team particularly critical specifiers. If you stake an aesthetic on a material, it had better be a good one.
The project called for a large amount of 45 minute fire and safety rated glazing. At that time, ceramic glazing was specified. But it had an aesthetic drawback: a noticeable tint, which is sometimes amber, sometimes greyish-green. “That industrial tint interferes with the transparency we strive for,” Albin says.
Safety is also a concern. Ceramic glass is brittle, and breaks easily on impact. For it to meet CPSC safety glazing requirements for doors, sidelites, and other hazardous locations in the IBC, it would have to be either filmed or laminated – which adds to its already high cost.
How do you meet all fire and safety code requirements, including the hose stream test? Is there a way to address life-safety and aesthetic concerns?
In 2019, SAFTI FIRST introduced SuperClear 45-HS-LI (patent pending), a clear, low-iron, 45minute, specialty fire protective glazing product that meets all fire, safety and hose stream requirements without any wires, tints, films or laminates. It is listed by both UL and Intertek in large sizes for use in 45 minute interior and exterior applications. SuperClear 45-HS-LI is proudly USA-made with fast lead times and costs significantly less compared to imported filmed and laminated ceramics used in the same 45-minute applications.
Knowing the aesthetic demands of the project, SAFTI FIRST worked with Haley-Greer, the awarded glazier, to present SuperClear 45-HS-LI as a clear, code-approved solution for the 45-minute glazing used in this project. SAFTI FIRST prepared product samples, UL and Intertek listing reports, and other product data for Haley-Greer’s project management team to submit to EYP. SuperClear 45-HS-LI was submitted with SAFTI FIRST’s GPX Architectural Series frames for the interior and exterior openings and GPX Builders Series for the interior and exterior doors.
“This was as clear a glass as you can get [Visible Light Transmittance rating: 90%]. The frame comes in a very low profile which adds even more to the aesthetic. Our lead architect told me, ‘This is the best product out there,’” Albin says.
Because of the product’s superior aesthetic, performance and documented testing from UL and Intertek, SuperClear 45-HS-LI received quick approval and is featured throughout The Quad.
SuperClear 45-HS-LI in GPX Builders Series Door and GPX Architectural Series Sidelite (pictured above) meets all the fire, safety and hose stream requirements without the need for films or laminates. UL and Intertek listed.
“This is a project of which we are extremely proud. It achieved the architect’s vision exactly,” says Tim Nass, VP of Sales at SAFTI FIRST. “It’s not often that a VE option is an upgrade for architects, but in this case, it absolutely was. With SuperClear 45-HS-LI, they got an affordable, USA-made, aesthetically superior product over ceramics that 100% complied with code and their specification.”
If you have any current or upcoming projects that could benefit from SuperClear 45-HS-LI or any of SAFTI FIRST’s comprehensive line of USA-made fire rated entrances, openings, storefront, curtainwalls or floors, visit www.safti.com or call us toll-free at 888.653.3333.
Related Stories
Sponsored | | May 3, 2014
Fire-rated glass floor system captures light in science and engineering infill
In implementing Northwestern University’s Engineering Life Sciences infill design, Flad Architects faced the challenge of ensuring adequate, balanced light given the adjacent, existing building wings. To allow for light penetration from the fifth floor to the ground floor, the design team desired a large, central atrium. One potential setback with drawing light through the atrium was meeting fire and life safety codes.
| Apr 25, 2014
Recent NFPA 80 updates clarify fire rated applications
Code confusion has led to misapplications of fire rated glass and framing, which can have dangerous and/or expensive results. Two recent NFPA 80 revisions help clarify the confusion. SPONSORED CONTENT
Sponsored | | Apr 23, 2014
Ridgewood High satisfies privacy, daylight and code requirements with fire rated glass
For a recent renovation of a stairwell and exit corridors at Ridgewood High School in Norridge, Ill., the design team specified SuperLite II-XL 60 in GPX Framing for its optical clarity, storefront-like appearance, and high STC ratings.
| Apr 8, 2014
Fire resistive curtain wall helps The Kensington meet property line requirements
The majority of fire rated glazing applications occur inside a building to allow occupants to exit the building safely or provide an area of refuge during a fire. But what happens when the threat of fire comes from the outside? This was the case for The Kensington, a mixed-use residential building in Boston.
| Apr 2, 2014
8 tips for avoiding thermal bridges in window applications
Aligning thermal breaks and applying air barriers are among the top design and installation tricks recommended by building enclosure experts.
Sponsored | | Mar 30, 2014
Ontario Leisure Centre stays ahead of the curve with channel glass
The new Bradford West Gwillimbury Leisure Centre features a 1,400-sf serpentine channel glass wall that delivers dramatic visual appeal for its residents.
| Mar 13, 2014
Austria's tallest tower shimmers with striking 'folded façade' [slideshow]
The 58-story DC Tower 1 is the first of two high-rises designed by Dominique Perrault Architecture for Vienna's skyline.
| Mar 7, 2014
Thom Mayne's high-tech Emerson College LA campus opens in Hollywood [slideshow]
The $85 million, 10-story vertical campus takes the shape of a massive, shimmering aircraft hangar, housing a sculptural, glass-and-aluminum base building.
| Feb 27, 2014
12 facts about heat-treated glass: Why stronger isn’t always better
Glass is heat-treated for two reasons: the first is to increase its strength to resist external stresses such as wind and snow loads, or thermal loads caused by the sun’s energy. The second is to temper glass so that it meets safety glazing requirements defined by applicable codes or federal standards.
| Feb 27, 2014
PPG earns DOE funding to develop dynamically responsive IR window coating Technology aims to maintain daylighting, control solar heat gain
PPG Industries’ flat glass business has received $312,000 from the U.S. Department of Energy (DOE) to develop a dynamically responsive infrared (IR) window coating that will block heat in the summer to reduce air-conditioning costs and transmit solar heat in the winter to reduce heating costs.