The town of Harrison was once a thriving center of industry, boasting countless chemical and metal product manufacturers. But until recently, the former center of this industrial activity lay vacant and forgotten. The mixed use Harrison Commons project is an early and essential step toward revitalizing this neglected area, ushering in a new chapter for the city.
A Place with Potential
The area is ideally located, with the nearby Harrison PATH Station providing access to lower Manhattan and Newark for over 6,500 weekday riders. The newly constructed Red Bull Arena and Prudential Center ensure that there will be no shortage of foot traffic in Harrison.
A Renaissance Begins
The efforts to rebuild the waterfront area began with a redevelopment plan approved in 2003 that allowed the land to be rezoned from industrial to mixed use and residential. The first building in this multiphase plan is Harrison Commons, designed by Minno & Wasko Architects and Planners. The project includes 275 residential units and 15,000 square feet of ground-floor retail space.
They chose ALPOLIC ACM panels with a champagne metallic finish for the exterior, joined with Fairfield Metal’s CFM system.
“It’s a fully sealed wet system with silicone sealing the joints. The system itself is proprietary, but it’s a pretty generic concept. We have our own extrusions for that system, but each fabricator will have something similar,” says Wojciech Siewior of Fairfield Metal LLC, the fabricators for the project.
Why wet seal rather than rainscreen? “It depends on where you want to seal the building, underneath the skin, or on the outside. It’s easier to do it on the outside rather than a rainscreen with a barrier underneath,” explains Siewior.
Up to the Task
Fairfield Metal was well prepared for fabricating the necessary panels for this development project. “It has been a very easy project for us. It’s kind of symmetrical, so all the sizes are fairly straightforward, so it was quick to measure and fabricate. It wasn’t challenging to us in any way,” says Siewior.
ALPOLIC helped make the project even simpler. “It’s always nice to have material all here all in one shot so we can go ahead and fabricate things right off the bat, so [ALPOLIC is] great with that so we don’t have to wait on the material.”
Just the Beginning
Harrison Commons represents the beginning of the process of revitalization. As developers set their sites on the surrounding empty fields and abandoned buildings, it’s sure to become a focal point of the city of Harrison’s rebirth.
Related Stories
| Feb 19, 2014
AIA class: The ABCs of IMPs – How to design and build with insulated metal panels
This AIA/CES class offers insight in areas including policies and codes surrounding insulated metal panels, contributions from LEED and tax credits, energy modeling, and business development opportunities available with IMPs. Take this course and earn 1.0 AIA LU/HSW/SD.
| Feb 13, 2014
Why you should start with a builder
They say the best way to eat an elephant is one bite at a time. Expanding your building or constructing a new structure for your business, church, or school isn’t all that different. Attacking it is best done in small, deliberate pieces.
| Feb 6, 2014
New Hampshire metal building awes visitors
Visitors to the Keene Family YMCA in New Hampshire are often surprised by what they encounter. Liz Coppola calls it the “wow factor.” “Literally, there’s jaw dropping,” says Coppola, director of financial and program development for the Keene Family YMCA.
| Feb 5, 2014
CENTRIA Redefines Coating System with Versacor® Elite
The Versacor Elite Coating System is a premium metal coating system that provides the highest level of protection in the harshest climatic or environmental conditions.
| Jan 30, 2014
What to expect in the metal building industry in 2014
Every year brings changes. This one won’t be any different. We’ll see growth in some areas, declines in others. Here’s a little preview of what we’ll be writing about 2014 when 2015 comes rolling in.
| Jan 28, 2014
White Paper: How metal buildings deliver long-term value to schools
A new white paper from Star Building Systems outlines the benefits of metal buildings for public and private school building projects.
| Jan 23, 2014
Think you can recognize a metal building from the outside?
What looks like brick, stucco or wood on the outside could actually be a metal building. Metal is no longer easily detectable. It’s gotten sneakier visually. And a great example of that is the Madison Square retail center in Norman, Okla.
| Jan 13, 2014
Custom exterior fabricator A. Zahner unveils free façade design software for architects
The web-based tool uses the company's factory floor like "a massive rapid prototype machine,” allowing designers to manipulate designs on the fly based on cost and other factors, according to CEO/President Bill Zahner.
| Dec 16, 2013
Is the metal building industry in a technology shift?
Automation is the future you can’t avoid, though you may try. Even within the metal building industry—which is made up of skilled tradesmen—automation has revolutionized, and will continue revolutionizing, how we work.
| Dec 10, 2013
16 great solutions for architects, engineers, and contractors
From a crowd-funded smart shovel to a why-didn’t-someone-do-this-sooner scheme for managing traffic in public restrooms, these ideas are noteworthy for creative problem-solving. Here are some of the most intriguing innovations the BD+C community has brought to our attention this year.
