flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

High-performance insulation brings design freedom, energy efficiency to urban redevelopment project

Sponsored Content

High-performance insulation brings design freedom, energy efficiency to urban redevelopment project

To fill the buildings with light without degrading the thermal performance of the building envelope, the architect chose Dow Corning Architectural Insulation Modules.


By Dow Corning | January 27, 2015
Uptown Bay City transforms a former industrial crane-manufacturing site into vib
Uptown Bay City transforms a former industrial crane-manufacturing site into vibrant mixed-use riverfront community.

When developers of Uptown Bay City (Bay City, Mich.) began transforming the former industrial site into a mixed-use, self-sustaining riverfront community, they faced a design challenge. How could they incorporate greater expanses of glass to maximize views of the waterfront without the trade-off in energy efficiency?

To fill the buildings with light without degrading the thermal performance of the building envelope, architects chose Dow Corning® Architectural Insulation Modules (AIM™).

   

These thin-profile units combine the aesthetics and convenience of curtainwall construction with the energy-savings benefits of high-performance Dow Corning® Vacuum Insulation Panels. Measuring only 1", the Dow Corning AIM™ units installed on Uptown Bay City's office complex deliver R- 16 performance—a significant increase in thermal resistance for slim-wall construction. Integrating seamlessly with curtainwall components, the modules are simple to install in most standard and custom glazing systems.

Read the case study.

 

Contact Information
www.dowcorning.com/highperformancebuilding
construction@dowcorning.com
800.248.2481

 

 

Related Stories

| Oct 13, 2010

New health center to focus on education and awareness

Construction is getting pumped up at the new Anschutz Health and Wellness Center at the University of Colorado, Denver. The four-story, 94,000-sf building will focus on healthy lifestyles and disease prevention.

| Oct 13, 2010

Community center under way in NYC seeks LEED Platinum

A curving, 550-foot-long glass arcade dubbed the “Wall of Light” is the standout architectural and sustainable feature of the Battery Park City Community Center, a 60,000-sf complex located in a two-tower residential Lower Manhattan complex. Hanrahan Meyers Architects designed the glass arcade to act as a passive energy system, bringing natural light into all interior spaces.

| Oct 13, 2010

Community college plans new campus building

Construction is moving along on Hudson County Community College’s North Hudson Campus Center in Union City, N.J. The seven-story, 92,000-sf building will be the first higher education facility in the city.

| Oct 13, 2010

County building aims for the sun, shade

The 187,032-sf East County Hall of Justice in Dublin, Calif., will be oriented to take advantage of daylighting, with exterior sunshades preventing unwanted heat gain and glare. The building is targeting LEED Silver. Strong horizontal massing helps both buildings better match their low-rise and residential neighbors.

| Oct 12, 2010

Richmond CenterStage, Richmond, Va.

27th Annual Reconstruction Awards—Bronze Award. The Richmond CenterStage opened in 1928 in the Virginia capital as a grand movie palace named Loew’s Theatre. It was reinvented in 1983 as a performing arts center known as Carpenter Theatre and hobbled along until 2004, when the crumbling venue was mercifully shuttered.

| Sep 13, 2010

Second Time Around

A Building Team preserves the historic facade of a Broadway theater en route to creating the first green playhouse on the Great White Way.

| Aug 11, 2010

Using physical mockups to identify curtain wall design flaws

Part two of a five-part series on diagnosing and avoiding cladding, glazing, and roofing failures from building forensics expert IBA Consultants.

| Aug 11, 2010

AAMA leads development of BIM standard for fenestration products

The American Architectural Manufacturers Association’s newly formed BIM Task Group met during the AAMA National Fall Conference to discuss the need for an BIM standard for nonresidential fenestration products.

boombox1
boombox2
native1

More In Category



Curtain Wall

7 steps to investigating curtain wall leaks

It is common for significant curtain wall leakage to involve multiple variables. Therefore, a comprehensive multi-faceted investigation is required to determine the origin of leakage, according to building enclosure consultants Richard Aeck and John A. Rudisill with Rimkus. 


halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021