Bass Lofts, a design-forward urban loft project in a trendy Atlanta neighborhood, is now pioneering the loft movement in the city. Retrofitted from public schools built in the 1920s, the structures are listed on the National Register of Historic Places. The buildings sat empty in the middle of a rapidly-transforming neighborhood in Atlanta known as Little Five Points. The area has an abundance of new eateries, boutiques and live music and the new lofts were one of the first multifamily residences to be built there.
Larimer/Shannon Group, the development specialists on the project that helped design the structure and specify products, wanted to respect the integrity of the former two school buildings: a classroom building and a gymnasium. Their mission also applied to the roof, which had to be completely replaced without disturbing the historical aesthetic of the building.
To abide by the historical and city guidelines, Larimer/Shannon Group selected a fully adhered UltraPly™ TPO Roofing System from Firestone Building Products with polyiso insulation, high-density cover boards and an UltraPly TPO Walkway Pad.
Installers from Sentry Roof Services – who won the bid against four other contractors – had several challenges on their hands. First, installers had to identify the source of several leaks in the old roof that allowed water to seep into the walls and cause damage to the internal structure. After waterproofing the walls, contractors could then turn their attention to the roof.
“The building had areas that didn’t drain properly, so we had to engineer the appropriate drainage by adding a ½-inch slope,” said Sentry Roof Services’ Bill Lomel. “We had to find a low-rise foam adhesive that didn’t disturb the old concrete deck, so we turned to Firestone Building Products.”
Once a public school in the 1920s, Bass Lofts was retrofitted to accompany the modern feel of Atlanta’s lively Little Five Points neighborhood while still preserving the historic look and feel of the original structure.
The team used Firestone’s I.S.O. Twin Pack Insulation Adhesive, a two-component, low-rise polyurethane adhesive designed for anchoring roof insulation to substrates that adhere to multiple layers of insulation. The I.S.O. Twin Pack, an example of Firestone’s focus on environmental responsibility, contains no solvents, near zero Volatile Organic Compounds (VOCs), and no harmful hydrochlorofluorocarbons (HCFC) or chlorofluorocarbons (CFCs).
Contractors also faced the added challenge of working around more than 100 HVAC units scattered throughout the roof. Building owner Clark Ventures also knew this would mean the roof would be subject to high traffic from people servicing the HVAC units, and challenged Larimer/Shannon Group with designing a system that protected the roof while also providing access points for the mechanical service personnel.
The solution was Firestone Building Products UltraPly TPO Walkway Pad, a reinforced walkway composed of white thermoplastic material. With a textured surface and a smooth bottom that easily welded to the TPO roofing membrane, the walkway pad will protect the roof from unnecessary damage caused by foot traffic. Made from recycled materials, the reflective white surface also reduces thermal expansion.
The walkway pads made the roof system eligible for a 20-year Firestone Red Shield warranty with an additional puncture endorsement. This is a special cut and puncture rider for specific projects where design management is overseen by a professional roofing consultant, providing an extra layer of protection to the building envelope.
Due to Firestone Building Products durable roofing solutions, Bass Lofts was able to maintain the historically crafted look that respects the architectural details of the 1920s. Today, residents of Bass Lofts are able to enjoy all the amenities of the Little 5 Points neighborhood while living in one of the area’s most enduring buildings.
Related Stories
75 Top Building Products | Apr 22, 2024
Enter today! BD+C's 75 Top Building Products for 2024
BD+C editors are now accepting submissions for the annual 75 Top Building Products awards. The winners will be featured in the November/December 2024 issue of Building Design+Construction.
Standards | Apr 22, 2024
Design guide offers details on rain loads and ponding on roofs
The American Institute of Steel Construction and the Steel Joist Institute recently released a comprehensive roof design guide addressing rain loads and ponding. Design Guide 40, Rain Loads and Ponding provides guidance for designing roof systems to avoid or resist water accumulation and any resulting instability.
Roofing | Jan 8, 2024
Researchers devise adaptive roof tile concept that adjusts to ambient temperatures
Scientists at the University of California Santa Barbara published a paper that proposes adaptive roof tile technology that can adjust to ambient temperatures. Using a wax motor, tiles could switch from a heating or cooling state enabling savings on heating and cooling costs.
75 Top Building Products | Dec 13, 2023
75 top building products for 2023
From a bladeless rooftop wind energy system, to a troffer light fixture with built-in continuous visible light disinfection, innovation is plentiful in Building Design+Construction's annual 75 Top Products report.
Metals | Sep 11, 2023
Best practices guide for air leakage testing for metal building systems released
The Metal Building Manufacturers Association (MBMA) released a new guidebook, Metal Building Systems - Best Practices to Comply with Whole-Building Air Leakage Testing Requirements.
Sponsored | Fire and Life Safety | Jul 12, 2023
Fire safety considerations for cantilevered buildings [AIA course]
Bold cantilevered designs are prevalent today, as developers and architects strive to maximize space, views, and natural light in buildings. Cantilevered structures, however, present a host of challenges for building teams, according to José R. Rivera, PE, Associate Principal and Director of Plumbing and Fire Protection with Lilker.
Building Materials | Jun 14, 2023
Construction input prices fall 0.6% in May 2023
Construction input prices fell 0.6% in May compared to the previous month, according to an Associated Builders and Contractors analysis of the U.S. Bureau of Labor Statistics’ Producer Price Index data released today. Nonresidential construction input prices declined 0.5% for the month.
Sponsored | Building Enclosure Systems | May 16, 2023
4 steps to a better building enclosure
Dividing the outside environment from the interior, the building enclosure is one of the most important parts of the structure. The enclosure not only defines the building’s aesthetic, but also protects occupants from the elements and facilitates a comfortable, controlled climate. With dozens of components comprising the exterior assemblies, from foundation to cladding to roof, figuring out which concerns to address first can be daunting.
Codes | Mar 2, 2023
Biden Administration’s proposed building materials rules increase domestic requirements
The Biden Administration’s proposal on building materials rules used on federal construction and federally funded state and local buildings would significantly boost the made-in-America mandate. In the past, products could qualify as domestically made if at least 55% of the value of their components were from the U.S.
AEC Innovators | Feb 28, 2023
Meet the 'urban miner' who is rethinking how we deconstruct and reuse buildings
New Horizon Urban Mining, a demolition firm in the Netherlands, has hitched its business model to construction materials recycling. It's plan: deconstruct buildings and infrastructure and sell the building products for reuse in new construction. New Horizon and its Founder Michel Baars have been named 2023 AEC Innovators by Building Design+Construction editors.