flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Resolving practical problems in roofing retrofits and renovations [AIA course]

Resolving practical problems in roofing retrofits and renovations [AIA course]

This course, worth 1.0 AIA HSW learning unit, provides expert advice on how to make a roof last as long as possible, and how to properly retrofit or reroof when the roof has run its course.


By BY C.C. Sullivan and Barbara Horwitz-Bennett | November 17, 2014
One of the largest PV installations in the country, thin-film solar laminate pan
One of the largest PV installations in the country, thin-film solar laminate panels on the roof of South Carolinas 1.2-million-
This article first appeared in the January 2013 issue of BD+C.
Initial cost of a commercial, industrial, or institutional building's roofing system is about 10% of total construction cost, but the roof can end up accounting for as much as 60% of a building's total maintenance cost throughout the building's life cycle. This course provides expert advice on how to make a roof last as long as possible, and how to properly retrofit or reroof when the roof has run its course.
 
After reading this article, you should be able to:
  • Describe the primary benefits of reroofing and roof renovation projects for building performance, with emphasis on the positive impacts on indoor environmental quality, comfort, and health for building occupants.
  • Discuss the rationales for existing roofing systems of choosing overlayment or tear-off as strategies for a roofing retrofit, along with their environmental and health considerations.
  • List at least four strategies for roofing applications as part of a sustainable design project (including LEED projects) for indoor environmental quality, moisture protection, mold prevention, and building envelope optimization.
  • Describe the primary requirements for vegetated (green) roofing system design and installation and their benefits in terms of reducing urban heat-island effect, energy consumption, and greenhouse gas emissions.

 

TAKE THIS FREE AIA COURSE AT BDCUNIVERSITY.COM

Related Stories

Roofing | Sep 30, 2016

A Florida-based roofing contractor mixes advocacy and philanthropy

The owner of Venture Construction Group says that caring for his father changed his perspective about work and life. 

Sponsored | Coatings | Sep 26, 2016

Valspar products at the forefront of innovation and sustainability

Fluropon SR and Fluropon Pure are two products that help Valspar cultivate a culture of innovation.

Sponsored | Roofing and Fire Safety | Sep 21, 2016

Metal roofing provides exceptional fire resistance

Buildings with great fire resistance will likely have lower insurance costs and be restricted by fewer codes, owing to the decreased risk. 

Sponsored | Energy Efficiency | Jul 27, 2016

Metal Roofs Have Solar Advantage

 A large roof can become a resource that saves significant money on energy consumption and helps reduce emissions of CO2 and it turns out metal roofs make excellent hosts for solar panels.

Sponsored | Roofing | Jun 29, 2016

Retrofit roofs instead of replacement

When faced with the need to replace a flat roof, many building owners find retrofitting a more viable investment, and so they erect a long-lasting, low-maintenance sloped metal roof.

Shopping Centers | Jun 3, 2016

Developer Robinsons Land adds powerful PV arrays to 10 malls in the Philippines

The Robinsons Starmills mall in San Fernando recently turned on a 2.9 megawatt rooftop PV plant.

Codes and Standards | May 19, 2016

Asphalt roofing group publishes updated shingle installation guide

Technical manual provides best practices for roofing professionals.  

Roofing | May 16, 2016

New guide focused on increasing energy and structural performance with raised-heel trusses

Higher trusses simplify attic ventilation, leave more space for insulation.  

Sponsored | Roofing | May 9, 2016

The incredible long-lived metal roof

A report by the Metal Construction Association (MCA) found that 55% Al-Zn coated low-slope steel standing seam roofing systems suffer very little corrosion if properly maintained. 

boombox1
boombox2
native1

More In Category


Standards

Design guide offers details on rain loads and ponding on roofs

The American Institute of Steel Construction and the Steel Joist Institute recently released a comprehensive roof design guide addressing rain loads and ponding. Design Guide 40, Rain Loads and Ponding provides guidance for designing roof systems to avoid or resist water accumulation and any resulting instability.



halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021