flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Sun, sky brightness, and glow: Making the most of daylight [AIA course]

Daylighting

Sun, sky brightness, and glow: Making the most of daylight [AIA course]

To some project teams, “daylighting” means using glass area to admit direct sunlight, period.


By C.C. Sullivan, Contributing Editor | May 30, 2017
Sun, sky brightness, and glow: Making the most of daylight [AIA course]

The Tidewater Joint-Use Library, Virginia Beach, Va., has an angled “daylight harvester” that runs its length to maximize available sunlight. Photo: Jeff Goldberg/ESTO, courtesy Carrier Johnson+Culture

To some project teams, “daylighting” means using glass area to admit direct sunlight, period. Yet there are better approaches to illuminating building interiors. Often, the sun’s direct rays are the last thing you need for effective daylighting. 

Sunlight comes with high solar heat gain—measured as solar heat gain coefficient (SHGC) for various types of glazing and translucent materials—and can lead to glare, occupant thermal discomfort, and material degradation caused by ultraviolet (UV) light.

Building occupants and owners want useful, uniform light, not high-contrast or high-heat sources, according to surveys like the seminal study led by the University of Washington (https://tinyurl.com/zhpx7h3). That’s why controlled and redirected sunlight almost always provides the best approach, while direct rays may be counted among the least desirable techniques. 

Building surfaces and enclosures receiving direct sunlight need solar control systems, including shading devices such as overhangs and fins that may be opaque or translucent, solid or louvered, according to the Best Practices Manual published by the Collaborative for

High Performance Schools. Canopies, window films, and insulated glazing units (IGUs) with internal louvers may also be required. Façades and areas facing north, on the other hand, need ways to maximize daylight harvest.

After reading this article, you should be able to:
+ Discuss the benefits and ideal kinds of daylighting illumination desired for such interiors as workplaces, libraries, and museums.
+ Describe the types of enclosure technologies and wholebuilding design approaches for maximizing beneficial daylighting.
+ List techniques for improving daylighting performance.
+ Compare the methods or materials commonly used in daylighting applications.

 

TAKE THIS FREE AIA COURSE AT BDCUNIVERSITY.COM

Related Stories

| Oct 13, 2010

Community center under way in NYC seeks LEED Platinum

A curving, 550-foot-long glass arcade dubbed the “Wall of Light” is the standout architectural and sustainable feature of the Battery Park City Community Center, a 60,000-sf complex located in a two-tower residential Lower Manhattan complex. Hanrahan Meyers Architects designed the glass arcade to act as a passive energy system, bringing natural light into all interior spaces.

| Oct 13, 2010

Community college plans new campus building

Construction is moving along on Hudson County Community College’s North Hudson Campus Center in Union City, N.J. The seven-story, 92,000-sf building will be the first higher education facility in the city.

| Oct 13, 2010

County building aims for the sun, shade

The 187,032-sf East County Hall of Justice in Dublin, Calif., will be oriented to take advantage of daylighting, with exterior sunshades preventing unwanted heat gain and glare. The building is targeting LEED Silver. Strong horizontal massing helps both buildings better match their low-rise and residential neighbors.

| Oct 12, 2010

University of Toledo, Memorial Field House

27th Annual Reconstruction Awards—Silver Award. Memorial Field House, once the lovely Collegiate Gothic (ca. 1933) centerpiece (along with neighboring University Hall) of the University of Toledo campus, took its share of abuse after a new athletic arena made it redundant, in 1976. The ultimate insult occurred when the ROTC used it as a paintball venue.

| Oct 6, 2010

Windows Keep Green Goals in View

The DOE's National Renewable Energy Laboratory has almost 600 window openings, and yet it's targeting LEED Platinum, net-zero energy use, and 50% improvement over ASHRAE 90.1. How the window ‘problem’ is part of the solution.

| Oct 6, 2010

From grocery store to culinary school

A former West Philadelphia supermarket is moving up the food chain, transitioning from grocery store to the Center for Culinary Enterprise, a business culinary training school.

| Sep 16, 2010

Green recreation/wellness center targets physical, environmental health

The 151,000-sf recreation and wellness center at California State University’s Sacramento campus, called the WELL (for “wellness, education, leisure, lifestyle”), has a fitness center, café, indoor track, gymnasium, racquetball courts, educational and counseling space, the largest rock climbing wall in the CSU system.

| Sep 13, 2010

Triple-LEED for Engineering Firm's HQ

With more than 250 LEED projects in the works, Enermodal Engineering is Canada's most prolific green building consulting firm. In 2007, with the firm outgrowing its home office in Kitchener, Ont., the decision was made go all out with a new green building. The goal: triple Platinum for New Construction, Commercial Interiors, and Existing Buildings: O&M.

| Sep 13, 2010

Committed to the Core

How a forward-looking city government, a growth-minded university, a developer with vision, and a determined Building Team are breathing life into downtown Phoenix.

| Aug 11, 2010

New data shows low construction prices may soon be coming to an end

New federal data released recently shows sharp increases in the prices of key construction materials like diesel, copper and brass mill shapes likely foreshadow future increases in construction costs, the Associated General Contractors of America said. The new November producer price index (PPI) report from the Bureau of Labor Statistics provide the strongest indication yet that construction prices are heading up, the association noted.

boombox1
boombox2
native1

More In Category




Sustainability

3 sustainable design decisions to make early

In her experience as an architect, Megan Valentine AIA, LEED AP, NCARB, WELL AP, Fitwel, Director of Sustainability, KTGY has found three impactful sustainable design decisions: site selection, massing and orientation, and proper window-to-wall ratios.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021