flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

To take on climate change, go passive

Multifamily Housing

To take on climate change, go passive

If you haven’t looked seriously at “passive house” design and construction, you should.


By Robert Cassidy, Executive Editor | June 27, 2018
The Orchards at ORENCO

The Orchards at ORENCO (Phase I), by REACH Community Development, Ankrom Moisan Architects, William Wilson, Stonewood Structural Engineers, Humber Design Group, RDH, Green Hammer, PAE Consulting Engineers, American Heating, Merit Electric, PMC, Walker Macy, and Walsh Construction. Photo: Casey Braunger / Ankrom Moisan Architects

   

Climate change is not a fashionable topic in certain quarters these days, but it cannot be ignored and will only get worse unless those who can do something about it take action.

Since two-fifths of energy use in the U.S. can be attributed to buildings (including multifamily structures), the responsible parties in this case are building owners, facilities managers, property developers, architects, engineers, builders, and contractors. In other words, you and your professional colleagues.

 

SEE ALSO: Take BD+C’s free Passive House continuing education course, "Building Passively"

 

PRESUMABLY, YOU’RE ALREADY DOING YOUR BIT
Maybe your firm has signed up for the AIA 2030 Commitment to eliminate carbon emissions in the buildings you design by 2030. Or you’re shooting higher and higher on your LEED for Homes projects. Or you’re certifying your apartment property with GreenPoint, or with the NAHB National Green Building Program. All commendable, but not enough. In general, those efforts will only yield an average energy savings of 20-25% over “conventional” construction, i.e., meeting minimum building energy code requirements. To make a real dent in reducing greenhouse gas emissions, we need to be in the 50-75% range of energy savings for new construction.

MAY I SUGGEST A FRESH APPROACH?
If you haven’t looked seriously at “passive house” design and construction, you should. OK, I know. You’ve already got an image in your mind of a bearded guy in lederhosen holding a stein of beer, standing in front of a cute little cottage in the Bavarian Alps. 

Passive house design and construction is anything but that; in fact, it started right here in the good ol’ USA. Passive house uses systems and building products you use every day. It employs techniques that are familiar to the construction trades. Most important, it relies on solid building science: Orient the building correctly to the sun. Seal it tight to halt air leaks that sap energy. Insulate the walls and roof to a “super” level. Use high-performance windows and doors.

Eliminate thermal bridges. Do these things right and you can save 80-90% on heat energy, 50% on cooling energy, for an average 50-70% total energy savings. That’s what you can get when you build “passively.”

PASSIVE HOUSE HAS SPECIAL APPLICATION TO MULTIFAMILY PROJECTS.
In addition to the energy savings (which are hardly trivial), apartment and condominium buildings built to passive house standards use quiet, low-volume air circulation systems that filter indoor air and enhance occupant comfort. That’s a nice payoff for doing the right thing.

To learn more about passive house (and gain 1.0 AIA HSW Learning Units or Professional Development Hours), go to BDCnetwork.com/building-passively-aia-course.

I hope “passive house” will be the start of a whole new professional adventure for you.

Related Stories

Multifamily Housing | May 1, 2018

Boutique condo provides 41 exclusive residences in Miami’s Bay Harbor Islands

Revuelta Architecture International designed the building.

Multifamily Housing | May 1, 2018

Call for experts: We’re looking for designers and builders of bicycle storage facilities for multifamily

The editors of Multifamily Design+Construction magazine seek experts for a  "how-to" article in the next issue.

Multifamily Housing | Apr 30, 2018

For housing costs, consider all occupancy costs - not just property taxes

It's inaccurate to focus on property taxes as a percentage of home value without acknowledging the actual cost of housing to which this percentage is applied.

Multifamily Housing | Apr 27, 2018

1912 publishing house becomes luxury residential condominiums

Gottesman Architecture and GSArch designed the renovated building.

Adaptive Reuse | Apr 26, 2018

Edison Lofts building is New Jersey’s largest non-waterfront adaptive reuse project

Minno & Wasko Architects & Planners designed the building.

Multifamily Housing | Apr 24, 2018

Adrian Smith + Gordon Gill Architecture designs 47-story condo tower in Miami

The tower will be located in Miami’s South Brickell neighborhood.

Multifamily Housing | Apr 23, 2018

Mass timber design for multifamily housing

The adaptability of urban development could be revolutionized through the inherent strength of mass timber construction.

Multifamily Housing | Apr 18, 2018

MAA, Greystar nation’s largest apartment owner, developer

With 5,651 apartment units started in 2017, Charleston, S.C.-based Greystar Real Estate Partners was the most active multifamily rental developer last year, according to the 2018 NMHC 50 report.

High-rise Construction | Apr 17, 2018

Developers reveal plans for 1,422-foot-tall skyscraper in Chicago

The tower would be the second tallest in the city.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021