For the 2018 AIA Convention and Trade Show, Building, Design + Construction magazine debuted its Design Showcase exhibit—a one-of-a kind tiny house, representing the “Workplace of the Future.” This unique structure, designed and constructed by Tiny House Northeast saw more than 1000 visitors during the two-day trade show, which was held in New York in June.
As the exterior sponsor, ALPOLIC turned to Metal Design Systems (MDS) in Cedar Rapids, Iowa to come up with a way to fabricate its Timber Series metal composite material —finished in Walnut— for this unique venture. Unlike most ALPOLIC projects, the tiny house required an install capable of staying in place while the structure it was applied to was actually rolling down a highway.
“We had to really think outside the box on how the fabrication and installation would need to be because, by necessity, this was a very different application for MCM,” said MDS Project Manager Lee Velky.
To achieve the best results, Velky and the MDSI team fabricated nearly 1,000 square feet of ALPOLIC’s 3mm metal composite material into 10” x 12’ strips, and then hand rolled the bottom edge of each piece. They did a test run on a mock up inside the facility to ensure the product not only looked great, but installed as easily as they’d hoped. It did.
On site at the tiny house build, the Walnut MCM was layered, much like residential vinyl, with a one inch overlap, helping to create a water-resistant siding. And just like vinyl, the ALPOLIC material didn’t require special tools or equipment to install. Workers were able to cut, shape and trim the product to fit the home’s dimensions on site with regular carpentry tools.
“We were so pleased with the end result. It’s always exciting to see our product used in an innovative, creative way,” said David Kearney, sales and marketing director for ALPOLIC. “And, this obviously provides new design options for customers, both residential and commercial.”
Related Stories
| Feb 19, 2014
AIA class: The ABCs of IMPs – How to design and build with insulated metal panels
This AIA/CES class offers insight in areas including policies and codes surrounding insulated metal panels, contributions from LEED and tax credits, energy modeling, and business development opportunities available with IMPs. Take this course and earn 1.0 AIA LU/HSW/SD.
| Feb 13, 2014
Why you should start with a builder
They say the best way to eat an elephant is one bite at a time. Expanding your building or constructing a new structure for your business, church, or school isn’t all that different. Attacking it is best done in small, deliberate pieces.
| Feb 6, 2014
New Hampshire metal building awes visitors
Visitors to the Keene Family YMCA in New Hampshire are often surprised by what they encounter. Liz Coppola calls it the “wow factor.” “Literally, there’s jaw dropping,” says Coppola, director of financial and program development for the Keene Family YMCA.
| Feb 5, 2014
CENTRIA Redefines Coating System with Versacor® Elite
The Versacor Elite Coating System is a premium metal coating system that provides the highest level of protection in the harshest climatic or environmental conditions.
| Jan 30, 2014
What to expect in the metal building industry in 2014
Every year brings changes. This one won’t be any different. We’ll see growth in some areas, declines in others. Here’s a little preview of what we’ll be writing about 2014 when 2015 comes rolling in.
| Jan 28, 2014
White Paper: How metal buildings deliver long-term value to schools
A new white paper from Star Building Systems outlines the benefits of metal buildings for public and private school building projects.
| Jan 23, 2014
Think you can recognize a metal building from the outside?
What looks like brick, stucco or wood on the outside could actually be a metal building. Metal is no longer easily detectable. It’s gotten sneakier visually. And a great example of that is the Madison Square retail center in Norman, Okla.
| Jan 13, 2014
Custom exterior fabricator A. Zahner unveils free façade design software for architects
The web-based tool uses the company's factory floor like "a massive rapid prototype machine,” allowing designers to manipulate designs on the fly based on cost and other factors, according to CEO/President Bill Zahner.
| Dec 16, 2013
Is the metal building industry in a technology shift?
Automation is the future you can’t avoid, though you may try. Even within the metal building industry—which is made up of skilled tradesmen—automation has revolutionized, and will continue revolutionizing, how we work.
| Dec 10, 2013
16 great solutions for architects, engineers, and contractors
From a crowd-funded smart shovel to a why-didn’t-someone-do-this-sooner scheme for managing traffic in public restrooms, these ideas are noteworthy for creative problem-solving. Here are some of the most intriguing innovations the BD+C community has brought to our attention this year.
