The Window and Door Manufacturers Association (WDMA) and the American Architectural Manufacturers Association (AAMA) have jointly released the updated 2011/2012 Study of the U.S. Market for Windows, Doors and Skylights. This report delivers accurate and timely information on window, door, skylight, and curtain wall market trends and product relationships for both residential and commercial construction. Historic data for 2006 through 2011 and forecast data for 2012 through 2015 are also included in the report. Forecasts are based on projections of construction activity as of March 2012.
According to the study's data, the demand for prime windows continued to remain slow in 2011, following housing activity in general, after falling from peak volumes in 2006. The demand for windows in new housing decreased by 2% in 2011 though remains slightly ahead of 2009 levels. Demand in 2012 is expected to increase further as the housing recovery begins to gain momentum. Meanwhile, remodeling and replacement windows fell by nearly 12% versus 2010. In total, the residential window market decreased by 9%.
Residential skylights experienced an increase of 2% from 2010 to 2011. The increase was driven heavily by the continued strength of remodeling and replacement activity, which now represents more than 80% of the residential skylight market. For 2012, the market is expected to grow 6% overall. Forecasts indicate continued growth through 2015.
Little change in the segmentation for interior door material types is expected over the next 5 years. However, significant volume is expected to return to the entry and interior door market as new construction rebounds. Further, nonresidential construction declined slightly in 2011, tempering growth in the nonresidential entry and interior door categories.
Additional and more detailed information on the residential and commercial fenestration markets is contained in the 2011/2012 WDMA/AAMA U.S. Market Studies, which includes all of the items listed below.
- WDMA/AAMA U.S. Industry Statistical Review and Forecast summarizes residential, non-residential and remodeling trends from government and industry sources.
- WDMA/AAMA U.S. Industry Channel Distribution Report profiles the residential and non-residential market for windows and doors as it flows through the identified distribution channels.
- WDMA/AAMA U.S. Industry Market Size Report quantifies residential and non-residential market volumes, both historic and projected.
- WDMA/AAMA U.S. Industry Regional Statistical Review and Forecasts detail information for 11 individual regions.
The 2011/2012 WDMA/AAMA Study of the U.S. Market for Windows, Doors and Skylights, as well as the other reports listed above, are available for purchase online at the WDMA Bookstore. +
Related Stories
Sustainability | Sep 18, 2024
3 living buildings made by a living practice
Prompting humans to reexamine our relationship to the environment, architecture creates the opportunity for us to physically experience ideas of beauty, performance, and structure through the distinct lens of place.
3D Printing | Sep 17, 2024
Alquist 3D and Walmart complete one of the nation’s largest free-standing, 3D-printed commercial structures
Walmart has completed one of the largest free-standing, 3D-printed commercial structures in the US. Alquist 3D printed the almost 8,000-sf, 20-foot-high addition to a Walmart store in Athens, Tenn. The expansion, which will be used for online pickup and delivery, is the first time Walmart has applied 3D printing technology at this scale.
Retail Centers | Sep 17, 2024
Thinking outside the big box (store)
For over a decade now, the talk of the mall industry has been largely focused on what developers can do to fill the voids left by a steady number of big box store closures. But what do you do when big box tenants stay put?
Government Buildings | Sep 17, 2024
OSHA’s proposed heat standard published in Federal Register
The Occupational Safety and Health Administration (OSHA) has published a proposed standard addressing heat illness in outdoor and indoor settings in the Federal Register. The proposed rule would require employers to evaluate workplaces and implement controls to mitigate exposure to heat through engineering and administrative controls, training, effective communication, and other measures.
Codes and Standards | Sep 17, 2024
New California building code encourages, but does not mandate heat pumps
New California homes are more likely to have all-electric appliances starting in 2026 after the state’s energy regulators approved new state building standards. The new building code will encourage installation of heat pumps without actually banning gas heating.
Mass Timber | Sep 17, 2024
Marina del Rey mixed-use development is L.A.’s largest mass timber project
An office-retail project in Marina del Rey is Los Angeles’ largest mass timber project to date. Encompassing about 3 acres, the 42XX campus consists of three low-rise buildings that seamlessly connect with exterior walkways and stairways. The development provides 151,000 sf of office space and 1,500 sf of retail space.
Education Facilities | Sep 16, 2024
Hot classrooms, playgrounds spur K-12 school districts to go beyond AC for cooling
With hotter weather occurring during the school year, school districts are turning to cooling strategies to complement air conditioning. Reflective playgrounds and roads, cool roofs and window films, shade structures and conversion of asphalt surfaces to a natural state are all being tried in various regions of the country.
Office Buildings | Sep 16, 2024
Maximizing office square footage through ‘agile planning’
Lauren Elliott, RID, NCIDQ, Director of Interior Design, Design Collaborative, shares tips for a designing with a popular and flexible workspace model: Agile planning.
3D Printing | Sep 13, 2024
Swiss researchers develop robotic additive manufacturing method that uses earth-based materials—and not cement
Researchers at ETH Zurich, a university in Switzerland, have developed a new robotic additive manufacturing method to help make the construction industry more sustainable. Unlike concrete 3D printing, the process does not require cement.
Libraries | Sep 12, 2024
How space supports programming changes at university libraries
GBBN Associate Sarah Kusuma Rubritz, AIA, uses the University of Pittsburgh's Hillman Library to showcase how libraries are transforming to support students’ needs.
