Drones and 3D printing are two of the most talked about and researched technologies on the planet right now. Be it in the nightly news, an online story, or just overhearing a coworker or friend talking about a recent advancement, it is difficult to go through a day without hearing something new about drones or 3D printing.
A recently completed project in Dubai can give you your daily fill of both ubiquitous technologies as it melds them in the R&Drone Laboratory, a lab that will conduct research on drones and 3D printing technologies. This lab won’t just research 3D printing technologies, however, as 3D printing technology has been put to use to construct the building itself. The lab was 100% 3D printed onsite, a first for a building in the UAE, and, according to CyBe Construction, a first for the world, as well.
The facility is based at the Solar Park as part of the Research and Development Centre. Due to the size of some of the elements of the laboratory, CyBe Construction, a Dutch company responsible for the engineering and 3D Concrete printing of the facility, transported the CyBe RC 3Dp to the location in Dubai. This device is a 3D printer that is able to move on caterpillar tracks to allow for the printing of large building components onsite.
Image courtesy of CyBe Construction.
3D printing the building onsite significantly reduced transportation costs and build time for the project. A building like the R&Drone Labortory typically takes up to a couple of months to build via traditional construction methods. By using onsite 3D printing, the facility was completed within three weeks. Additionally, 3D Concrete printing is more environmentally friendly because it reduces CO2 emissions and waste.
CONVRGNT is the contractor for the project and Wanders & Wagner is the architect. Witteveen + Bos was the contractual design engineer. The Dubai Electricity and Water Authority was the client.
Related Stories
3D Printing | Oct 9, 2024
3D-printed construction milestones take shape in Tennessee and Texas
Two notable 3D-printed projects mark milestones in the new construction technique of “printing” structures with specialized concrete. In Athens, Tennessee, Walmart hired Alquist 3D to build a 20-foot-high store expansion, one of the largest freestanding 3D-printed commercial concrete structures in the U.S. In Marfa, Texas, the world’s first 3D-printed hotel is under construction at an existing hotel and campground site.
3D Printing | Sep 17, 2024
Alquist 3D and Walmart complete one of the nation’s largest free-standing, 3D-printed commercial structures
Walmart has completed one of the largest free-standing, 3D-printed commercial structures in the US. Alquist 3D printed the almost 8,000-sf, 20-foot-high addition to a Walmart store in Athens, Tenn. The expansion, which will be used for online pickup and delivery, is the first time Walmart has applied 3D printing technology at this scale.
3D Printing | Sep 13, 2024
Swiss researchers develop robotic additive manufacturing method that uses earth-based materials—and not cement
Researchers at ETH Zurich, a university in Switzerland, have developed a new robotic additive manufacturing method to help make the construction industry more sustainable. Unlike concrete 3D printing, the process does not require cement.
3D Printing | Jun 20, 2023
World's largest 3D-printed building completed in Florida
Printed Farms, known for completing Florida’s first permitted 3D-printed house in Tallahassee, announces the completion of the world’s largest 3D-printed building: a luxury horse barn.
3D Printing | Jun 1, 2023
World's first 3D-printed place of worship being built in India
The 3D-printed temple is set to embark on an architectural revolution in the Nation.
3D Printing | May 12, 2023
World’s first 3D-printed medical center completed
3D construction printing reached new heights this week as the world’s first 3D-printed medical center was completed in Thailand.
Sustainability | May 1, 2023
Increased focus on sustainability is good for business and attracting employees
A recent study, 2023 State of Design & Make by software developer Autodesk, contains some interesting takeaways for the design and construction industry. Respondents to a survey of industry leaders from the architecture, engineering, construction, product design, manufacturing, and entertainment spheres strongly support the idea that improving their organization’s sustainability practices is good for business.
3D Printing | Apr 11, 2023
University of Michigan’s DART Laboratory unveils Shell Wall—a concrete wall that’s lightweight and freeform 3D printed
The University of Michigan’s DART Laboratory has unveiled a new product called Shell Wall—which the organization describes as the first lightweight, freeform 3D printed and structurally reinforced concrete wall. The innovative product leverages DART Laboratory’s research and development on the use of 3D-printing technology to build structures that require less concrete.
3D Printing | Jan 12, 2022
Using 3D-printed molds to create unitized window forms
COOKFOX designer Pam Campbell and Gate Precast's Mo Wright discuss the use of 3D-printed molds from Oak Ridge National Lab to create unitized window panels for One South First, a residential-commercial high-rise in Brooklyn, N.Y.
AEC Tech Innovation | Oct 7, 2021
How tech informs design: A conversation with Mancini's Christian Giordano
Mancini's growth strategy includes developing tech tools that help clients appreciate its work.
