A national research study conducted by Eric Mower + Associates' Contractor Insight specialty reveals that contractors make nearly half of their tool and building supply purchases from big-box retailers.
"Retailers score high for variety and convenience, but that's not the whole story for brand marketers; they must 'see' the customer as a shopper, not only as a contractor. If they don't— and they don't know the shopper's journey or how to align their product in the retail environment— they will not reach full potential in the aisles," said John O'Hara partner and leader of EMA's Contractor Insight specialty.
When it comes to purchasing hand tools, power tools and tool accessories, big-box retailers like Home Depot and Lowe's have an advantage over traditional distributors as the preferred shopping destination. Study respondents cited convenience, range of products and brands, and accessibility as their reasons for choosing their place of purchase.
According to the research, 46% of contractors purchase hand tools, 47% purchase power tools and 49% purchase accessories from big-box retailers; 42%, 35% and 36% purchase hand tools, power tools and accessories from distributors, respectively.
Contractors perceived big-box retailers to have a better variety of products, lower pricing, and greater convenience as a one-stop shop, according to the study. Of the respondents, 63% would prefer to make small-volume purchases at big box retailers.
Those who prefer purchasing through distributors said it was for their customer service (75%), relationships (70%), knowledge (63%) and delivery (54%), all of which ranked significantly higher when compared to retailers. Distributors were also ranked high for having tools for pros, shipping directly to the contractor site and credit arrangements. According to the survey, 80% would make large-volume purchases at the distributorship, especially for plumbers (91%).
The EMA study was administered online to 500 general contractors, electricians, plumbers and HVAC specialists. More than 90 percent of respondents have at least six years' professional experience. BD+C
Related Stories
Sustainability | Sep 18, 2024
3 living buildings made by a living practice
Prompting humans to reexamine our relationship to the environment, architecture creates the opportunity for us to physically experience ideas of beauty, performance, and structure through the distinct lens of place.
3D Printing | Sep 17, 2024
Alquist 3D and Walmart complete one of the nation’s largest free-standing, 3D-printed commercial structures
Walmart has completed one of the largest free-standing, 3D-printed commercial structures in the US. Alquist 3D printed the almost 8,000-sf, 20-foot-high addition to a Walmart store in Athens, Tenn. The expansion, which will be used for online pickup and delivery, is the first time Walmart has applied 3D printing technology at this scale.
Retail Centers | Sep 17, 2024
Thinking outside the big box (store)
For over a decade now, the talk of the mall industry has been largely focused on what developers can do to fill the voids left by a steady number of big box store closures. But what do you do when big box tenants stay put?
Government Buildings | Sep 17, 2024
OSHA’s proposed heat standard published in Federal Register
The Occupational Safety and Health Administration (OSHA) has published a proposed standard addressing heat illness in outdoor and indoor settings in the Federal Register. The proposed rule would require employers to evaluate workplaces and implement controls to mitigate exposure to heat through engineering and administrative controls, training, effective communication, and other measures.
Codes and Standards | Sep 17, 2024
New California building code encourages, but does not mandate heat pumps
New California homes are more likely to have all-electric appliances starting in 2026 after the state’s energy regulators approved new state building standards. The new building code will encourage installation of heat pumps without actually banning gas heating.
Mass Timber | Sep 17, 2024
Marina del Rey mixed-use development is L.A.’s largest mass timber project
An office-retail project in Marina del Rey is Los Angeles’ largest mass timber project to date. Encompassing about 3 acres, the 42XX campus consists of three low-rise buildings that seamlessly connect with exterior walkways and stairways. The development provides 151,000 sf of office space and 1,500 sf of retail space.
Education Facilities | Sep 16, 2024
Hot classrooms, playgrounds spur K-12 school districts to go beyond AC for cooling
With hotter weather occurring during the school year, school districts are turning to cooling strategies to complement air conditioning. Reflective playgrounds and roads, cool roofs and window films, shade structures and conversion of asphalt surfaces to a natural state are all being tried in various regions of the country.
Office Buildings | Sep 16, 2024
Maximizing office square footage through ‘agile planning’
Lauren Elliott, RID, NCIDQ, Director of Interior Design, Design Collaborative, shares tips for a designing with a popular and flexible workspace model: Agile planning.
3D Printing | Sep 13, 2024
Swiss researchers develop robotic additive manufacturing method that uses earth-based materials—and not cement
Researchers at ETH Zurich, a university in Switzerland, have developed a new robotic additive manufacturing method to help make the construction industry more sustainable. Unlike concrete 3D printing, the process does not require cement.
Libraries | Sep 12, 2024
How space supports programming changes at university libraries
GBBN Associate Sarah Kusuma Rubritz, AIA, uses the University of Pittsburgh's Hillman Library to showcase how libraries are transforming to support students’ needs.
