flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

EclipseEdge eases installation of raised roof edges, gravel stops, and full coping caps

Roofing

EclipseEdge eases installation of raised roof edges, gravel stops, and full coping caps

The EclipseEdge edge metal profile uses a two-part design with a base and a top cover to eliminate steps often required in traditional installations. 


By David Malone, Associate Editor | July 17, 2017

A new product from Mule-Hide Products Co. promises to save time and reduce materials costs when installing raised roof edges, gravel stops, and full coping caps in single-ply roofing systems. The EclipseEdge edge metal profile uses a two-part design with a base and a top cover to eliminate steps often required in traditional installations.

EclipseEdge is not fastened to the horizontal surface of the roof, which eliminates the need to seal fasteners with membrane flashing. Joint covers are not needed either thanks to notches in the ends of the top cover that allow for easy overlapping and a continuous clip can be omitted when the face dimension exceeds four inches. The fastener holes are pre-punched and the product can be installed using battery-operated equipment.

EclipseEdge complies with ANSI/SPRI ES-1 and is available in prefinished steel, aluminum, stainless steel, and bonderized steel. The standard base is fabricated from 22-gauge GALVALUME® Plus steel or .050-gauge aluminum. The cover is available in 24-gauge GALVALUME with mill or Kynar® finish, 24-gauge stainless steel or .040-gauge aluminum in mil or Kynar finish.

Related Stories

Sponsored | Coatings | Sep 26, 2016

Valspar products at the forefront of innovation and sustainability

Fluropon SR and Fluropon Pure are two products that help Valspar cultivate a culture of innovation.

Sponsored | Roofing and Fire Safety | Sep 21, 2016

Metal roofing provides exceptional fire resistance

Buildings with great fire resistance will likely have lower insurance costs and be restricted by fewer codes, owing to the decreased risk. 

Sponsored | Energy Efficiency | Jul 27, 2016

Metal Roofs Have Solar Advantage

 A large roof can become a resource that saves significant money on energy consumption and helps reduce emissions of CO2 and it turns out metal roofs make excellent hosts for solar panels.

Sponsored | Roofing | Jun 29, 2016

Retrofit roofs instead of replacement

When faced with the need to replace a flat roof, many building owners find retrofitting a more viable investment, and so they erect a long-lasting, low-maintenance sloped metal roof.

Shopping Centers | Jun 3, 2016

Developer Robinsons Land adds powerful PV arrays to 10 malls in the Philippines

The Robinsons Starmills mall in San Fernando recently turned on a 2.9 megawatt rooftop PV plant.

Codes and Standards | May 19, 2016

Asphalt roofing group publishes updated shingle installation guide

Technical manual provides best practices for roofing professionals.  

Roofing | May 16, 2016

New guide focused on increasing energy and structural performance with raised-heel trusses

Higher trusses simplify attic ventilation, leave more space for insulation.  

Sponsored | Roofing | May 9, 2016

The incredible long-lived metal roof

A report by the Metal Construction Association (MCA) found that 55% Al-Zn coated low-slope steel standing seam roofing systems suffer very little corrosion if properly maintained. 

Roofing | Feb 24, 2016

Better membranes, better roofing [AIA course]

To earn 1.0 AIA CES HSW learning units, study the article carefully and take the exam.

boombox1
boombox2
native1

More In Category


Standards

Design guide offers details on rain loads and ponding on roofs

The American Institute of Steel Construction and the Steel Joist Institute recently released a comprehensive roof design guide addressing rain loads and ponding. Design Guide 40, Rain Loads and Ponding provides guidance for designing roof systems to avoid or resist water accumulation and any resulting instability.



halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021