High volume, high turnover, guest comfort and expectations: architects designing for the hospitality industry face some unique challenges. Fortunately, they have an optimal partner in Trim-Tex, whose durable, attractive, cost-effective finishing solutions help maintain the integrity of an architect’s original design over the entire life of a building, even in high traffic spaces subjected to all the pressures of professional hospitality.
Vinyl beads are a perfect fit for hotels: they allow the client to build an elegant, beautiful aesthetic without blowing their budget on expensive, labor-intensive custom upgrades. Even more important, however, is vinyl’s flexibility and durability. Vinyl beads offer excellent protection against impact and expansion, both of which can cause unsightly cracking and incur unnecessary repair costs.
Products like Trim-Tex Deflection Bead protect against building expansion (caused by environmental factors as diverse as humidity, temperature, and building movement). Installing these products during the building’s initial construction is a great investment that will save the client maintenance costs in perpetuity. That’s why Trim-Tex expansion protection products have been used in such high-profile projects as the JW Marriott (built in conjunction with the quarter-billion dollar Mall of America Expansion) and the Kohler Lodge in Green Bay (a four-diamond hotel in the Titletown District).
The same flexibility that allows vinyl to perform so well in expansion protection scenarios also makes it an excellent choice for corner protection. Vinyl beads like those produced by Trim-Tex offer the same basic impact protection for drywall edges as metal beads, but have the additional advantage of being dent-resistant. Where a hard impact can dent a metal bead, requiring expensive repairs even if the drywall is intact, Trim-Tex vinyl beads bounce back to their original shape. Even better, vinyl beads are available in a huge array of sizes and shapes, such as the Bullnose Splayed Corner Bead used in Chicagoland’s Oakbrook Mall or the flush corner guard system, Bumper Bead, at the Chicago Marriot Marquis.
Many of the Trim-Tex beads also make use of a special Tear-Away design that saves on labor and installation cost. The beads include a tear-off strip that protects the adjacent surface from compound and paint and is then easily removed to leave a perfectly clean, finished edge.
Trim-Tex products like these are designed to make beautiful buildings that will pass the test of time, maintaining their beauty for many years with minimal maintenance – a perfect solution for the demanding world of hospitality.
Find all these solutions and more at www.trim-tex.com
Related Stories
| Feb 15, 2011
New 2030 Challenge to include carbon footprint of building materials and products
Architecture 2030 has just broadened the scope of its 2030 Challenge, issuing an additional challenge regarding the climate impact of building products. The 2030 Challenge for Products aims to reduce the embodied carbon (meaning the carbon emissions equivalent) of building products 50% by 2030.
| Feb 11, 2011
Four Products That Stand Up to Hurricanes
What do a panelized wall system, a newly developed roof hatch, spray polyurethane foam, and a custom-made curtain wall have in common? They’ve been extensively researched and tested for their ability to take abuse from the likes of Hurricane Katrina.
| Feb 10, 2011
Green Plumbing Fixtures Take a Major Leap Forward
Today’s low-flow plumbing fixtures not only conserve water, they also provide convenience and ease of maintenance.
| Feb 10, 2011
Sloan Valve Co. Flushmate
Sloan Valve Co.’s Flushmate IV 1-gallon pressure-assist system uses air pressure to flush. Rather than pulling waste through the trapway, the system, which works with tank-style high-efficiency toilets, pushes the waste through at nearly three times the flow rate of gravity units. Large water surface area also helps the toilets stay clean longer.
| Feb 10, 2011
Delta WaterSense-labeled showerheads
Delta offers nine collections with WaterSense-labeled showerheads, which are equipped with droplet-enlarging technology that increases both water and energy savings. An Arzo Collection showerhead is pictured.
| Feb 10, 2011
Kohler urinals
Kohler offers urinals with three flush options to fit a variety of applications: standard 1-gallon, pint, or waterless.
| Feb 10, 2011
Moen M•Power electronic faucets
At 0.5 gpm, Moen’s M•Power electronic faucets meet the current standards, and offer features that eliminate waste. Improved electronic sensors reduce reflectivity to stop false sensing, and turn off automatically after 30 seconds. Electronics can be installed above or below deck to accommodate different sink styles.
| Feb 3, 2011
Duro-Last Roofing, Inc. Adds Standing Seam Metal Product Line
Duro-Last Roofing, Inc. is adding a standing seam metal product line to its roofing system offerings. With five profiles and more than thirty colors to choose from, the new line will enable authorized Duro-Last contractors to provide a standing seam roofing installation to meet virtually any aesthetic requirements.
| Jan 25, 2011
Sherwin-Williams Zero-VOC Claim Misleading, Says BBB
In a move that could prompt industry-wide changes to claims about volatile organic compounds (VOCs), the Better Business Bureau’s National Advertising Division (NAD) has told Sherwin-Williams it should stop marketing its Harmony line of paints as “zero-VOC.” Sherwin-Williams said it will accept NAD’s decision and will take the findings into consideration in its future advertising.
